Singularity is a container framework for Linux. Unlike Docker, it can be utilized on the HPC cluster. This guide shows the basics of converting existing docker containers to singularity containers. To learn more about Singularity and Docker, see the official documentation.
Accessing singularity
You need to set up Spack first. Once that is done, here is how you access Singularity in an interactive session:
| Code Block | ||
|---|---|---|
| ||
# Log in to HPC submit note ssh curie.pbtech # Start interactive HPC session srun -n1 --pty --partition=panda --mem=8G bash -i # Load singularity (NB: Spack setup must be completed) spack load singularity@2.6.0 # Verify singularity is available singularity --version > 2.6.0-dist |
Building singularity images from docker images
In this example, we’ll build the “lolcow” test image from the public docker hub, and run it:
| Code Block | ||
|---|---|---|
| ||
# Note: The `docker://` prefix is required singularity pull docker://godlovedc/lolcow > [..] > Done. Container is at: ./lolcow.simg singularity run lolcow.simg > __________________ > < Hello, world! > > ------------------ > \ ^__^ > \ (oo)\_______ > (__)\ )\/\ > ||----w | > || || |
Authentication with private docker DTR
To access a private docker DTR, it is advisable to create an access token first. With that, do the following:
| Code Block |
|---|
# Setup token file echo your-token-goes-here > dtr.token chmod 600 dtr.token # Setu upSetup environment. DTR username is case sensitive export SINGULARITY_DOCKER_USERNAME=your_dtr_username export SINGULARITY_DOCKER_PASSWORD=$(cat dtr.token) # Now, you can pull from your private DTR # Again, the `docker://` prefix is required singularity pull docker://dtr.example.com/group/image_name |
...